Kitchen
Oven, range and stove repair in Los Angeles
When the oven won't heat, dinner plans fall apart. Let's find out what's really going on.
$20 service call through Oct 31 (then $95)
Say yes to the repair and your service call fee counts toward it in full.
An oven that runs 40 degrees cool and one that won't heat at all are different problems. A technician comes to your home and tests the heat source, the sensor and the controls one by one, so the right part gets fixed. You get the price before any repair.
When the oven won't cooperate
Safety first
If you smell gas, don't touch the oven, the controls or any light switch. Leave the home and call SoCalGas or 911 from outside.
Why won't my oven heat up?
What's usually behind it
A failed bake or broil element, a weak gas igniter (it glows, yet the gas valve never opens), or a control relay.
Try this first
Make sure delay start or Sabbath mode isn't on. Look at the bake element for blisters or a break. On a gas oven, watch whether a flame follows the igniter's glow within about 90 seconds.
Why is my oven running too hot or too cool?
What's usually behind it
A drifting temperature sensor, a partly failed element, or the calibration setting.
Try this first
Preheat for 20 minutes and compare with an oven thermometer. Many ovens let you adjust the setting by up to about 35°F.
Why is the oven door still locked after self-clean?
What's usually behind it
The lock stays on until the oven cools down. If the lock motor or switch has failed, it stays locked.
Try this first
Let the oven cool completely, then turn its breaker off for a minute to reset the control.
Why won't a burner on my range light?
What's usually behind it
The igniter is wet or dirty, the burner cap is sitting crooked, or the spark module is failing.
Try this first
With the knob off and the burner cool, let it dry out fully, brush the igniter tip with a dry toothbrush, and set the cap back on squarely.
Why is the oven display blank or showing an error code?
What's usually behind it
A tripped breaker, a control board fault, or a wiring problem.
Try this first
Check the breaker, and write down the exact code. It helps narrow down the cause.
From request to repair.
Tell us what's wrong
Pick the appliance and describe the problem in our short form. We get in touch to set up a time that works for you.
We come to you
A technician visits your home and starts with a diagnosis, so the fix is based on the cause, not a guess.
You get the price first
You learn what failed and what the repair costs before any work. Say yes to the repair and your service call fee counts toward it in full.
Repair, once you say yes
With your go-ahead, we do the repair. When a part needs ordering, that can mean a second visit, and you'll know before we start.
Areas we cover
Book a visit
Let's take a look.
Three short steps: the appliance, your address and your number. We get in touch to set up a time.
$20 service call through Oct 31 (then $95)
Say yes to the repair and your service call fee counts toward it in full.
A 90-day warranty covers each repair we make.
What happens next
- Tell us what's wrong
- We come to you
- You get the price first
- Repair, once you say yes