ApexAppliance Repair Marina

Kitchen

Dishwasher repair in Los Angeles

A dishwasher that won't empty or won't clean sends you back to the sink after every meal. Let's find the cause.

$20 service call through Oct 31 (then $95)

Say yes to the repair and your service call fee counts toward it in full.

A dishwasher is part plumbing, part electrical. A technician comes to your home and checks the filters, pumps, seals and drain path first, then explains what failed and gives you the price before any repair.

Dishwasher problems, in plain words

Safety first

Cut the power before your hand goes into the sump: unplug the dishwasher or flip its circuit breaker off. Wear gloves too, since some models have a small chopper blade down there.

Why is there a pool of water in my dishwasher?

What's usually behind it

A clogged filter, a blockage at the air gap or the disposal inlet, or a dead drain pump.

Try this first

With the power off, twist out the filter and rinse it. Run the garbage disposal for a few seconds. If there's a small cap next to the faucet, lift it off and clear what's inside.

Water left in the dishwasher: four places to look

Why do dishes come out dirty?

What's usually behind it

A dirty filter, blocked spray-arm holes, a weak circulation pump, or water that isn't hot enough.

Try this first

Rinse the filter, poke out the spray-arm holes with a toothpick, and run the kitchen tap until it's hot before you start the dishwasher.

Why is my dishwasher leaking at the door?

What's usually behind it

A worn door seal, regular dish soap making too much foam, or a cracked spray arm.

Try this first

Use dishwasher detergent only. Wipe the door seal and look for tears or flat spots.

Why won't it start, or why are the lights blinking?

What's usually behind it

A faulty latch switch, the control lock, or the control board.

Try this first

Look for a lock symbol; pressing and holding one key for a few seconds usually clears it. Close the door firmly until you hear it click.

Why do clean dishes come out wet?

What's usually behind it

The rinse aid has run out, or the heating element or fan has failed. It may also be a condensation-dry model working as intended.

Try this first

Top up the rinse aid. Plastic items stay damp on most newer models, and that alone isn't a fault.

Step-by-step guideWater left in the dishwasher: four places to lookRead the guide

From request to repair.

  1. Tell us what's wrong

    Pick the appliance and describe the problem in our short form. We get in touch to set up a time that works for you.

  2. We come to you

    A technician visits your home and starts with a diagnosis, so the fix is based on the cause, not a guess.

  3. You get the price first

    You learn what failed and what the repair costs before any work. Say yes to the repair and your service call fee counts toward it in full.

  4. Repair, once you say yes

    With your go-ahead, we do the repair. When a part needs ordering, that can mean a second visit, and you'll know before we start.

Areas we cover

Other appliances we repair

Book a visit

Let's take a look.

Three short steps: the appliance, your address and your number. We get in touch to set up a time.

$20 service call through Oct 31 (then $95)

Say yes to the repair and your service call fee counts toward it in full.

A 90-day warranty covers each repair we make.

What happens next

  1. Tell us what's wrong
  2. We come to you
  3. You get the price first
  4. Repair, once you say yes
What needs fixing?
Appliance
Where and when?
Preferred time (optional)

We'll confirm the exact window by phone or text.

How do we reach you?

We'll call or text this number to set up the visit.

The model tag (door edge or tub side) and what's going wrong: draining, cleaning, leaking or starting.

No payment now. You'll know the repair price before anything is fixed.

We use these details to arrange your visit and follow up on it. See our privacy page.

Your request didn't go through, so nothing was sent. Please call or text (424) 524-1195.